Tronxy X5SA Pro - Holder for sensors with 18mm diameter
Description
This is a holder to replace the Tronxy inductive autolevel sensor with a third party sensor (18mm diameter). E.g. useful if you want to print on glass and need a capacitive sensor. I printet it with Cura 4.5 using the experimentel tree supports and 80% infill (PLA). But should be no problem to print it with ~25% infill and without supports. X-Offset from Nozzle is -44mm Y-Offset from Nozzle is -29mm
Statistics
Likes
7
Downloads
0