Boat for the delivery of bait with your own hands
Description
What I bought: 3548 1100kW brushless motor - https://ali.ski/WpRx- Steering wheel servo - https://ali.ski/oel50_ Hopper servo drive - https://ali.ski/AhXGT Equipment - https://ali.ski/LocpF Speed control - https://ali.ski/Hk1n7 18650 batteries - https://ali.ski/b2-SS Bearings - https://ali.ski/VSVnQ LEDs - https://ali.ski/uITJ3F Voltage telemetry - https://ali.ski/UTKVW Module for switching on the light from the remote control - https://ali.ski/SmApFG Flexible coupling - https://ali.ski/GVaLtU Battery belt - https://ali.ski/-5-pmQ I made a carp boat for the delivery of bait, for which I designed and printed various spare parts on a 3D printer, the boat turned out to be fast and maneuverable and at a price that won't be too expensive. If someone will be interested and need parts for Assembly, I will be happy to help in designing and manufacturing. And So we, we will need a 650mm long abs plastic housing with a thickness of 2 mm. For Assembly designed and printed the frame of the deadwood motor on which he placed the fitting for filling the deadwood with oil without disassembling the boat, the motor here is installed without a collector 3542 1100kw at 800 W, in deidwood I installed two 4x10mm bearings on both sides, the shaft itself is made of stainless steel 4mm and a screw on 36mm, the steering wheel frame was also designed and printed on a 3D printer, the frame is mounted with bearings 4a10mm, also raspechatan frame mounting of equipment and speed controller, the hardware I use is a 6 channel i6x flyskay, Speed controller with a power reserve of 125 amps. also made a frame for the servo control of the hopper unloading, on the Boat I drilled holes for LEDs and installed holders, from the front by 5 mm and from the back by three, this is how the boat looks from the interior on which I have already drilled holes for the rudder and frame of the deadwood motor, Then proceed to the build, first of all I will glue the steering wheel frame, I treat the surface with acetone and smear the surface with homemade glue based on abs plastic with acetone, which I made myself. Who will be interested in how to make such glue, write in the comments, it is very good at gluing plastic surfaces, dries quickly, agglutinate of the product becomes solid. And so smear the body with glue and all densely insert and press. and so the item dries within an hour, but for complete solidification, it is better to withstand 24 hours. 've seen how much is the bearing of deadwood helm, then glued the frame to the motor deadwood, I do everything the same way, If you do not have acetone, you can also use acrylic solvents, the effect of budes is similar. it will look something like this acetone no acetone Can be smeared with acrylic solvent I fill everything with glue from ABS plastic and paste it into the hull of the boat, in the same way I glue the frame of the equipment and the speed controller and the battery mount frame into the housing, in such a battery frame you can install any battery up to 20,000 milliampere hours 2S 7.4 volts
Statistics
Likes
67
Downloads
0