ECX Front A-Arms & Bulkhead, 2WD Circuit, Ruckus, Torment (ECX1018)
Description
Replacement Lower front A-Arms and front bulkhead for your ECX buggy. Co-worker had issues with theirs breaking on impacts so I measured and modeled a printable one so they're easier to replace. I suggest you print them on their side, for the arms use supports everywhere, and 100% infill and/or thick walls. and make sure the screws are NOT *too* tight when putting it together otherwise it could split the plastic and weaken the arm, making it more likely to crack and break! You may likely need to use a drill to gently round out and correct the hole sizes as they're approximate and not 100% guaranteed accurate. You may need to measure and drill/tap some of the holes to the correct size after printing. WARNING: 3d printed arms will never be as durable as the original injection molded parts! This is just a significantly cheaper alternative to purchasing multiple replacement arms if you have troubles with yours breaking every time you hit something. ________________________________________ EDIT LOG: 4/9/2020: Added front bulkhead and hinge pin retainer. I have discovered some errors with the A-arms as well which retain the hinge pin correctly and will upload the corrected files after printing and testing them!
Statistics
Likes
13
Downloads
0