Ender 3 Pro SKR 1.3/1.4 (Turbo) Front Housing
Description
Hi Makers/moders and others, This is a front cover with micro SD card access for the BIGTREETEC SKR 1.4 Turbo on the Ender 3 Pro. I got a full size SKR 1.4 Turbo mainboard for my Ender 3 Pro but could not find a good housing for it with access to the SD cards slot on the front. This is why I built my own. This can be installed using the original bolts coming off the original housing. I did replace the fan in the housing with a 4010 blower because I found that the 4010 fan that it came with was to loud as it will run at full speed and always on. When mounting, please make sure to mount the board and the fan on the housing before inserting the housing, then it should just slide in. For it to slide in you have to remove the tensioner on the front of the printer. Hope this will be of help to anyone. If any one wants the version with the original 4010 van please let me know and I will upload it as well. Thanks.
Statistics
Likes
43
Downloads
0