170mm drone frame
Description
170mm drone frame that would work with 3" props and 11xx or 12xx motors. anything with a 9mm mounting size. The holes in the center will fit any 20x20 Flight controller stack and the holes closer to the outside could hold the rx unit or a canopy. i'll post links to parts i used soon. message if you have any questions i printed it with priline carbon fiber pc and it worked pretty well until i dropped it from about 100 feet. it broke but handled it pretty well. nothing else was damaged. Print Settings - 0.25mm layer height - 1mm Top/Bottom Layer thickness - 25% gyroid infill
Statistics
Likes
0
Downloads
0