Mouthpiece for Yamaha WX5
Description
A faithful parametric clone of Yamaha's recorder-style mouthpiece for their WX5 wind controller, with a tapered end and tabs to help ease putting it on. PARAMETER DESCRIPTION Half Slice - Automatically slices the model into two halves that can be easily glued together after printing. Slice Vertical - Places the cut down the vertical center, which produces a smoother lip surface on FDM prints. Slice Separation Distance - How far apart to place the slices when half slice is enabled. Stoutness - Determines the width of the tip. Works from values 6.5 upwards. Tip Height - The thickness of the outside of the tip from top to bottom. Tip Offset - Offset up or down, i.e. tilt towards upper or lower lip. Hole Height/Width - The dimensions of the hole in the tip. Upper/Lower Lip Width - Determine the steepness of the lip surface taper on either side. Lower values give shallower tapers. Shank Taper - The steepness of the taper from the neck to the lip surfaces. Higher values give more gradual taper Inner Diameter - The diameter of the inside of the connecting surfaces. Shell Thickness - The thickness of the walls.
Statistics
Likes
0
Downloads
0