PRUSA faceshield RC2 remix - "stacked"
Description
Big thanks goes to Josef Průša and the PRUSA company for this design! Update: It is highly recomendet to use the RC3 version (because of faster printing). You can now download the "stackable" RC3 x4 version under: https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc3 or the rmx up to 18x stacked version: https://www.thingiverse.com/thing:4248957 I decided to stack some "original PRUSA-faceshields" to avoid print interruption. You can use one of the templates wich maches the high of your printer. Attention: Read the instructions bevor bring it in circulation there are some important things you have to notice. Use the following link to get those: https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2/files This design is not for selling! - It is recomendet not to stack more then four shields (because of the printing time) So you have to wait until print is finished and generaly it is necassary to bring the shields as fast as possible into circulation. - It is recomendet to print it with 0,1mm to 0,25mm layerhigh! - Integrated support can cut away after printing. Volume/Part info: - PRUSA faceshield x 8 (recomended for most printers like Prusa i3) - PRUSA faceshield x 16 (recomended for printers with a high about 40 cm (like Prusa i3 plus)
Statistics
Likes
22
Downloads
0