FPV/HD Vertical Tail Mount (Caddx and Runcam)
Description
I saw a video from GizFPV(on Youtube) where he had a Runcam Split Mini3 on the tail of his Radian and he shared the STL with me, but the Caddx Turtle board layout is a bit different so I went ahead and used his idea, but adapted it for the TurtleV2. - The sensor housing has slots on the top and bottom to allow the sensor to be placed with the wires coming out the top or bottom. - The holes in the mount are slightly undersized for M2 screws to be used without needing a nut on the back side. - The main mount sensor portion should be tight enough to hold the camera senor without the additional "Sensor cover." - Designed to have the metal plate on the outside for cooling as well as using it to hold the ribbon cable connector to the PCB. - The plug style connector on the PCB may need to be removed to fit in the housing, mine was already broken and I only use the soldered on wires to run the camera, so the from the PCB to the print does not include that tan plastic piece. GizFPVs video with his design https://youtu.be/WQoSGq0DrnU?t=249 *Updated 2020/04/15 I have added a Runcam Split Mini2 design also. It has the camera offset to allow it to sit more inline with the vertical tail plane. I printed it with the PDB mounting surface up and supports under it.
Statistics
Likes
5
Downloads
0