Ford Model A Roadster 1931 model
Description
After a while I had the time to bring this project to a decent stage and I decided to publish it. The object is made up of 42 stl files, but: * 2 of them are not part of the model itself, the "windscreen template" and the "rear indow template" should only be printed to be used as templates to help cutting in exact shape some transparent acetate or similar to be used as "glass" for the windscreen and the rear window * the "half internal wheel" and the "half external wheel" have to be printed five times each, * the "handle" has to be printed three times, * the "internal handle" has to be printed two times. Please notice that the model was designed to resemble the 1931 Ford Model A Roadster, but several details are missing or different from the original. I beg your pardon but I made a compromise between design time, decentness of result and printability. E.g. the starter handle ("cranck") was indeed not present in the original that was already with electric starter. The engine parts are coarse, and the entire lower part is flat with no detail (ugly but it helps a lot when printing the "main body"). Scale is approximately 1:15. The complete model is 26 cm long, i.e. 10" 1/5
Statistics
Likes
87
Downloads
0