Face Shield
Description
Covid-19 - emergency - Face Shield / Splash Shield PPE - personal protection equipment (tips graciously accepted to help pay for supplies to make these) intended for use by emergency responders, and medical staff in place of commercially available splash shields In this time of low supply. please use and modify as you wish or need to supply those in need with much-needed splash shields! Designed factors: * face shield stays secured once attached for user safety. * quick to print and assemble. * uses a low amount of filament. * able to print on smaller MakerBot replicator / flash fordge etc style printers * flexibility on elastic strap material. - use what you have even rubber bands if needed. * It is comfortable to wear without the need for foam padding etc. items needed. * transparency film (can use any thickness, but 2mil or thicker is best) 8 1/2 x 11 or A4 1/2" or smaller sewing elastic (or anything that can be used as an elastic band to hold the mask on) I use 3/8" because of thats what I could get quickly. * 3 hole punch or hand punch to put the holes in the transparency * filament and printer. <B>Print 2 buckles and one body.</B> this is version 5 of the design
Statistics
Likes
11
Downloads
0