Ventilator connector for Decathlon EASYBREAH SUBEA - COVID 19. NO SUPPORT
Description
THE NEWEST VERSION IS HERE: https://www.prusaprinters.org/prints/30062-ventilator-connector-for-various-snorkeling-masks- Because Thingiverse sucks. Airtight Includes 2 models – for 2 separate channels and both channels together. Tested and approved by head reanimatologist of the Ministry of Health of the Republic of Bashkortostan and Volga Region of Russia. It is already used by at least 300 doctors in -Bashkortostan Republic of Russia -Tver region of Russia -Vladimir region of Russia 4 perimeters, 0% infill, 70mm/s. PETG recommended but PLA also ok. How to test: 1. Dip the part in the soapy water 2. Cover the bigger hole with your palm 3. Blow into the smaller hole and watch for bubbles. If no bubbles and it fits the mask and the filter, everything is ok! Disinfect with at least 70% alcohol, don't use heat treatment for disinfection. Thanks to https://www.isinnova.it/easy-covid19-eng/ for the idea. This model is much smoother and is airtight. UPD 02.04.2020: less precision required to print filter-connector, thicker walls UPD 03.04.2020: 0.1mm larger diameters, less free movement UPD 04.04.2020: removed watermark (ineffective PR among hospitals), added sources UPD 05.04.2020: thicker walls for two-way connector UPD 06.04.2020: wider chamfer for wider connection. Smaller version added. UPD 18.04.2020: decathlon version fits better to the mask
Statistics
Likes
32
Downloads
0