Magnet and string lamp
Description
A Lamp which can be turned on by moving two magnets close to each other. Needed parts: * 3D printed parts, see attached STLs. * 12V Power supply * 12V LED Strip * End Stop Switch or "Micro Switch" with roller * 2 pieces of string * some wire * 2 Magnets in cylindrical form: D=10mm, L=5mm * M3 Nuts and Bolts for mounting the microswitch. The main case parts need to be glued, I used "UHU Allplast" glue for plastics. You can use short lengths of filament to align all parts. This micro switch would work: https://www.amazon.de/Unbekannt-St%C3%BCck-Mikroschalter-Wechselschalter-polig/dp/B00BXHN0J2/
Statistics
Likes
31
Downloads
0