Dillon XL650 / XL750 Tool Head Hollder WALL MOUNT
Description
These are tool head holders for wall mounting. I made these as an alternative for the slide in ones. These are easier to print as well. Works with the XL650/750 Tool heads. I made the screw holes to work with the 50lb plastic anchors screws from homedepot or lowes. (E-Z Ancor #25350) I'm using a 0.6 Nozzle and print time is about 3.5hrs per print. This is at a .3 layer height. I only made the ones I needed, they are labeled on the front. If you need one for a caliber you don't have, let me know. Print Settings: I did these with the following, they are strong in my opion and I tugged on them just to check they wont fall; Prusa Slicer 0.3 Layer Height Gyroid Infill 15% Infill 0.6 Nozzle
Statistics
Likes
4
Downloads
0