Victualling Inshore Craft VIC rc cargo ship 1/35
Description
This is my second 3d print project. Scale: 1/35 Lenght: 730mm Width: 174mm The different hull pieces can be aligned with small pieces of 6mm rods or pipes. The stern tube can have a diameter of 6 or 8mm. You only need to print the right hull section for the chosen dieamter. The propeller is desinged for a M4x10x5 threaded brass insert. It is possible to build the ship with a normal rudder, or a ducted propeller. You may need a M3 threated insert for the ducted propeller version. I had problems joining the pieces together, because the printed parts where warped too much. Printing larger thin walls in PETG without an enclosure, seems to be difficult. I have printed a mold in 1/87, to laminate a hull. Here is a link to the mold in Fusion 360: https://a360.co/2JWv5SM You can ask me, if you want to have the stl files for a mold in a specific scale.
Statistics
Likes
149
Downloads
0