Raspberry Pi 4B With Camera Slot, 40mm Fan, Well Vented Case
Description
This is a Remix to Michael Kellsy "mkellsy" original Raspberry Pi 4B case design which he did a great job. My rendition modifies the top of the case to have slotted vents instead of the honeycomb design "the honeycomb can be a pain to print correctly". Using a 40mm case fan "will be needed to be mounted on the outside". I also added the camera slot for the ribbon cable that was missing on the original. I have also modified the bottom of the 8020 case. Again added the slotted vents instead of the honeycomb design. The original can be found here: https://www.thingiverse.com/thing:3793664 04-19-2020 Update: I have added 75mm VESA vented base & modified the top of the case for max cooling with side vents with a port on top to see the status LED on the Pi board. You can also use whichever fan grill you like. I have not included the fan grill, because I did not designed it. But if you would like to get it from the designer Prot0typ1cal, He did an amazing job you can get it here: https://www.thingiverse.com/thing:1750976 I'd recommend using either the Noctua NF-A4x10 5V Version Fan (40x40x10mm) or Noctua NF-A4x20 5V Version Fan (40x40x20). The only difference is the height 10 vs 20 mm and the 20mm RPM is a little faster. Both are very quiet & Noctua fans are built to last. As a reference the fan in the picture is the 40x40x20. Note to content creators (YouTube, Patreon, Educators, etc). Yes I understate that you are "technically" getting paid in the backend for creating content & thank you for creating that content. So to expand everyone's knowledge, you have permission to use this design in your content as long as you: State that it is not yours & acknowledge who designed it. Provide a link to where you got it from, so others can download & enjoy it as well. BTW if you like my design, please don't forget the click the "like" button & show you appreciation. Thanks & Enjoy!
Statistics
Likes
6
Downloads
0