Turnigy SK3 Dust / Dirt plug TPU
Description
I created a plug for the rather big holes in the sk3 motor. Suuper tight fit at the from me printed size (116%) 114 or 115 would be fine too, i wanted to make sure nothing gets in. Printed with TPU 0.2MM and a 4 line brim. (Yes i know, there are other ways for dirt to get it but its a start.) FILE at the End. (it is a 116% scale from the original file because the model of the motor i got was wrong. For you it will be 100% and print ready. The file is really tight and you need a tool to press the sides in, optionally print it at 99 or 98% on the Y axis (length)
Statistics
Likes
0
Downloads
0