G29 Pedal Extension + cable saver
Description
The tough size is 234 mm by 145 mm for build plate issues. As the name should tell you this is an extension for the G 29 pedals so that you can put it against a wall without killing the cable. It screws in at the bottom. Please make sure you put the thing flat on the printbed while slicing. It needs 3x M6 screws 25-40mm long. I printed it with an 0.8 nozzle and 0.64 layer height. 22.01.2021 - added a picture of the sketch with measurements (it is in the image file in the image folder)
Statistics
Likes
3
Downloads
0