BLV Cube Enclosure / Housing / Cover
Description
I am currently planning to build the MGN Cube. This is a lid with hinged doors to use the printer unhindered in dirty conditions or if you want to print ABS. If necessary, you can lift the entire lid upwards, as nothing is screwed on. This Enclosure is still a Work in Progress. Files, instructions, and other stuff will change! The handle is just a provisional until I think of something clever Needed Parts: (Either you take original profiles or you print your own 2020 Extrusions) 4x 200mm 2020 4x 175mm 2020 2x 283,6 mm 2020 8x Adapter 45 Degree V2 4x Cover 508mm For the hinge you need: 2x Hinges 1 2x Hinges 2 And of course you also need 3mm plates for the lid. Next Steps: - Fixing Printing orientation - Magnetic door holder - Optimization of ventilation If you have any ideas, feel free to bring them along! Updates: 19.April.2020 Added 2 new Versions of the 45 Degree Holders. V2.0 - Only the Rods V2.1 - The Rods and Tabs for Support the Holding
Statistics
Likes
28
Downloads
0