S800 Nose with hinged Canopy and covers for Foxeer mini 1.8mm and Gopro HERO 8 - VERSION 2
Description
Update 2020-07-24 Enlarged the cutout for the HERO8 0.5% as it was a bit tight. Nose for S800 sky shadow with camera mount for Foxeer Falkor MINI, Predator MINI and Razer MINI with 1.8mm lens and GoPro HERO8. Designed to be used with a 16mm battery strap. buckle less magic straps are prefered. Please note that becouse the hero 8 is so tall it will protrude out the top of the mount, unlike with my mount for the hero 7. This is my own design but its inspired buy PlayerOneFPV. Credits to Robschii for designing the 4s Haube that I modifyed with hinges. Use 100mm of piano wire or similar for the hinge. Nose is printed on its back with the camera pointing up, supports everyware. canopy is printed standing up with the hinges pointing up, supports everyware. I used a 10mm brim when printing the canopy in petg, good bed adhesion is manditory! Use the print settings and orientation described here https://www.thingiverse.com/thing:4008697
Statistics
Likes
3
Downloads
0