Fluval FX6 intake
Description
This is an intake for the Fluval FX6 canister filter. This will connect directly to the hose that is provided with the filter at purchase. Heat up the end of the hose with a heat gun at the lowest setting till it is malleable and insert it into the top coupler. when you print the top coupler be sure to pay attention to which side is up, in your slicer you should be able to see a faint line inside, it is slightly smaller on the bottom to mate the 10 inch pipe snugly. I was able to prime the FX6 with no leak issues from this so it should fit completely snug and sealed with no glue or any other harmful chemicals introduced to the fishtank.
Statistics
Likes
4
Downloads
0