Anycubic Kossel SKR 1.3/1.4, MKS Gen L, MKS SGEN mounting brackets
Description
These are Anycubic Kossel (20cm bed size) mounting brackets for the SKR 1.3, SKR 1.4, MKS GEN L, and MKS SGEN mainboards. These mainboards are virtually the same size and hole spacing, so all these boards will fit on these brackets inside the Anycubic Kossel with the 20cm bed. I've also include mounts for a 12v 5010 Turbine fan for the stepper drivers and an stl file for the Stepper Driver cooling duct - which is friction fit over the fan and stepper drivers. Aside from the printed parts, you will need the following hardware: 12v 5010 Turbine fan 2x m3x18mm Hex Head Screws for the Turbine fan 4x m4 2020 T-nuts 4x m4x8mm Hex Head Screws (for the T-nuts) 6x m3x5mm Brass Threaded Inserts 4x m3x6mm Hex Head Screws (mainboard to mounting brackets Optional USB Printer cable with a 90 (elbow) connector so that it fits in the tight space between the USB socket and the stepper motor.
Statistics
Likes
52
Downloads
0