Ultramodern Soap Dish Remix
Description
This is a remix of Ultramodern Soap Dish (public domain) by Anenome: https://www.thingiverse.com/thing:1394419 In this remix, I removed the feet so the dish will print without supports. However, I wanted feet so that water will not pool up inside the dish. So in place of the feet, I put holes in the size of the filament. Then 3 small pieces of filament can be used as feet. See the Post-Printing section below for instructions. <hr> Edit 04/15/2020: I've remixed both styles of soap dishes to add slots on the bottom to allow the water to drain. No need to add feet - so the Post-Processing section doesn't apply to these files. The slots are angled at 45° so they will print without supports and they have been placed so they are not visible when the dish is right-side up. These files can also be scaled as needed because there are no holes that must be a certain size. These are the files named _Soap Dish Rounded Top w Slots.stl_ and _Soap Dish Squared Top w Slots.stl_. The versions with feet as described above are named _Soap Dish Rounded Top w Feet.stl_ and _Soap Dish Squared Top w Feet.stl_. _Note: If the .zip file that is downloaded using the **Download All Files** button contains only the two original files, then click on the **Thing Files** button and download the four files individually. I have also made a correction to the squared-top with feet version, so if you want to print it, you'll want to download the new one. The rounded-top with feet version remains unchanged, except for its name._ <hr> I also removed the outermost pieces as I felt they were too thin and easily broken. The result is a sturdy soap dish that prints without supports and has feet (or slots) to allow water to drain away. I've included remixes of both styles of soap dishes - squared-top and rounded-top.
Statistics
Likes
56
Downloads
0