Working Stargate with Arduino Control
Description
****************** Stop!!!! ******************** Glitch Has Come Out With A New Version Of The Stargate That Blows This Out Of The Water! Check It Out Here Http://Www.Thingiverse.Com/Thing:1603423 ************************************************* This Is My Remix Of Glitch'S Working Stargate. I Remixed This With The Following Changes: - I Altered The Base Extensively, So That It Prints In One Large Piece On A 150Mm ^ 3 Print Bed ( With Separate Sides And A Top Cap ) - The Base Also Has Mounting For A Nema 17 Stepper Motor , And An Arduino Uno With A Motor Shield. - The Gear Was Modified To Snugly Fit Onto The Stepper Motor, And Added A Hole Through Which The Stepper Motor Could Be Tightened To Its Mount. - I Combined Some Parts That Were 2 Pieces Into One Piece So That The Build Required Less Gluing And Was Structurally Stronger I Also Have Included The Dialingsequence Arduino Sketch That I Wrote To Control The Project. Detailed Instructions Are Now Available, Click On Instructions To View Them Video Of The Final Result: Http://Youtu.Be/Jdsckgwpn2K A Huge Thank You To Glitch For The Original Design Of The Working Stargate! ****** V 1.01 Update 15/12/2014 ****** - Altered The Base To Add More Material To The Interior Vertical Pillar On The Micro Controller Side For More Support For Printing Without Support Material. - Altered The Base To Have Have Smaller Holes So It Will Slice Properly ( 5Mm Diameter Became 4Mm Diameter ) - Altered The Pins On Side1 And Side2 To Have Smaller Pegs To Fit The New Holes ( 4Mm Diameter To 3Mm Diameter ) Updated Files Are Now Named _17_1_X_Base-Btm_V1_01_Fixed.Stl _18_1_X_Base-Side1_V1_01_Fixed.Stl _19_1_X_Base-Side2_V1_01_Fixed.Stl * Instructions On The Thingiverse Page Had Randomly Been Mostly Deleted, Luckily I Had Them Saved As A Text File And Have Restored Them ( To A Slightly Earlier Version )
Statistics
Likes
3493
Downloads
0