3x6 Iris Inspired Mechanical Keyboard
Description
Wired exactly like the Iris but without the top row. You can use the QMK configurator with the Keebio Iris layout, just leave the top row blank. I've included the Iris wiring schematic and the keymap.json file that you can import into QMK Configurator, use this website to make your hex file: https://config.qmk.fm/ Flashing your .hex firmware from QMK Configurator to the Pro Micro (you need to flash both Pro Micros): https://www.youtube.com/watch?v=VR53Wo9Z960 Both the TRRS jack and the micro usb jack aren't very strong. I reinforced both by basically covering them with hot glue, I highly recommend you do the same. The left and right sides are both wired the same, but mirrored. Parts: 44x of your favorite switches and keycaps, I like Gateron Black Switches from Aliexpress 26awg wire, I prefer silicone wire because it won't melt when you solder it 2x 4.7k resistors 44x Diodes, https://www.amazon.com/gp/product/B06XB1R2NK 2x Pro Micro microcontrollers, https://www.amazon.com/gp/product/B07FXCTVQP 2x 1/8in TRRS breakout board, https://www.amazon.com/gp/product/B01N7NDCVI 1x 3.5mm TRRS cable, https://www.amazon.com/gp/product/B01IVRF8I2 18x M2.5 Socket Head Cap Screws, https://www.amazon.com/gp/product/B07F14J7X8
Statistics
Likes
13
Downloads
0