Carbine Camera - A grip and stock for your mirrorless or DSLR camera
Description
Parts: + 2 magnets that are 6mm diameter x 4mm height to hold the 1/4in hex key + 1/4-Inch Hex Key For Socket Set Screws part# 4320-h (~75mm tall) + 1/4-20 Socket Head Screw + 510 quick release or similar + Small Rig 11in. articulating arm or similar Suggestions: Print with the top, the flat side, facing down and at a 15 degree angle so that the handle is pointing straight upward, at close to a 0 degree angle (see photo). Use a carbon fiber pla filament, I think it looks the nicest. The Niceyrig Grip has a smaller platform and is made to fit the Niceyrig quick release base: https://www.amazon.com/gp/product/B07F7P1G1R/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 Print Settings: Wall Thickness: 1.2mm Layer Height: 0.25mm Infill: 21% Supports: Touching build plate, 50 degree angle, ZigZag pattern, 15% density
Statistics
Likes
48
Downloads
0