Anet A8 & E12 Linear Rod !REMIX - e3d Hemera X-Carriage mount with EZABL
Description
THIS IS A REMIX: FOR THE ORIGINAL FILES PLEASE LOOK HERE https://www.thingiverse.com/thing:2637378 Hardware required: m3x8 qty 4 m3x10 qty 4 m3 nut qty 4 I recommend this hardware kit: https://www.amazon.com/gp/product/B07PJQC7T6/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=jpangers-20&linkId=c2d91e1d0d36c44e1f70f97715968752&language=en_US (affiliate link) The m3x8 bolts are used to secure the mount to the hemera, the m3x10 are used to secure the mount to the carriage. Notes: I enlarged the holes for the bearings, they are still snug on the rod but it is better than the original. If you have never swapped hot ends, you will need to re-flash your boards firmware. I used TH3DUF U1.R2.A8, and had to adjust the home offset and probe offset as well as define custom esteps. If you have any more questions, I would be happy to answer them. I have more information about actually installing the original linear rod modification in the description of this thing: https://www.thingiverse.com/make:750896
Statistics
Likes
3
Downloads
0