Ummagawd Remix V1 DJI Digital FPV System & Caddx Vista Frame Replacement Hatch Sled Kit
Description
This is a replacement Ummagawd Remix V1 Frame Replacement Hatch Sled so you can mount a DJI FPV Air Unit to it. I am still testing to see what is the best filiment to use but so far I have only tried PLA+. I have a feeling that it is not strong enough. I will updated this page when I find out more. If PLA+ does not work out, I plan to try PETG next. Update (Apr 14, 2020) The PLA+ plus did not fail after a few flight but I end up trying a different material anyways. This time I tried using Carbon Fiber Nylon and I hope this will be strong enough with the Carbon Fiber giving it a stiffer structure and the Nylon will flex on impact. I have never use this filament but that is the expectation I was aiming for. I also made a minor change to the 3D model because the nut was a bit too small. It is still very tight and needs a little bit of heat to press it in. The nut should be very snug because I do not want to deal with it falling out when I loosen the screw. Update (Jun 05, 2020) Someone requested a taller tray, so I add another file named: DJI_Air_Unit_1.5_mm_Taller.stl It is only 1.5mm taller than the original one I created. Update (Aug 26 2021) Added a stronger version and m2 holes for a Caddx Vista
Statistics
Likes
6
Downloads
0