Dyson V7 drill dust collector
Description
This is a drill dust collector attachment to Dyson V7/8/10/11. This is a remix of two files. I've added a stiffener to the dust collector and scaled it smaller to fit into the adapter. There are multiple parts. I glued them using Gorrilla glue, which works great for PETG. The picture looks bad because the collector print failed near the top. Rather than reprint the whole thing, I print the rest separately and glued them together. The important part is the tab. To quote joochung who made the original adapter "I would recommend you print it on its side. Ensure the layer lines run the full length from back to front. Do not print this vertically". You have the option of printing the full or half tabs. I tried both and I like he half tab better, because when I tried to remove the support for the full tab I ended up breaking it. You don't need to print supports for the half tabs. Also I would highly recommend using brim when printing out the adapter and dust collector. TinkerCAD link: https://www.tinkercad.com/things/gNXZV0HGWqp
Statistics
Likes
23
Downloads
0