Tumbler Barrel and Lid
Description
I remixed the excellent Tumbler from @Jonna https://www.thingiverse.com/thing:3990339 I made the barrel 95mm high, so that with the lid it will be about 105-110mm tall. This is to fit on my tumbler that can take 2 barrels at a time if they are the right dimentions. I also added some grips to the lid. I found that getting the lid unscrewed once it was on tight enough to be water-tight was difficult so I added some texture to give your hands more purchase. Here are the Tinkercad links so you can make the Barrel as short/tall as you need, or add any other features to the lid (e.g. a label) https://www.tinkercad.com/things/2vWskn8QWrc-tumbler-barrel-95mm https://www.tinkercad.com/things/27kAApk56y9-tumbler-lid-with-grip I found that my tumbler needed the barrel to be slightly longer and be raised up a bit, so here's a 105mm tall barrel with raised brims. https://www.tinkercad.com/things/gSnuXeiWcqc-tumbler-barrel-105mm-wide-brim
Statistics
Likes
2
Downloads
0