COVID19 MASK v2 rubber strip bordering
Description
Update: rotated models to face the printing table layout for those who were unable to rotate the previously posted models. ====================================== Hello This is a rubber strip bordering printed on flexible filament, for the project COVID19 MASK v2 (Link Below) https://www.thingiverse.com/thing:4225667 This project has 4 strip bordering models for the 3 mask sizes: Solid - Totally solid Hollow - Hollow on both sides Half_Hollow - Hollow only on one side. Half_Hollow_Big - Hollow only on one side with a big curve You don't need to cut to fit, but if you find it easier, cut and seal the cut area. In my tests the solid didn't need glue to hold it in position. However, a glue to be fitted is recommended. Hot glue works well, white glue can also work but it takes longer to dry, or use another glue that you think is efficient to glue this part. It is also recommended to tie with string or attach with something, each part fitted until the glue dries. Half_Hollow_Big, needs an adjustment in the curvature of the nose to seal the seal at this point, a drop of hot glue or glue, solves this problem. Print what best suits you. And I hope that this project helps in the sealing and comfort of your mask.
Statistics
Likes
88
Downloads
0