Parametric COVID-19 Respiratory Mask [with Fusion 360 source]

Description

This design is based on https://www.thingiverse.com/thing:4225667 I've created a Fusion 360 project where I've reverse engineered all the files from the reference design. There are 3 breathing mask sizes (large, medium, small) each one comes in 2 thickness (thin 0.8mm, wide 1.2mm). There are 2 types of filter holders: - A standard holder for a sheet of filter (you can buy some filters or make one on your own from a surgical mask or from a vacuum cleaner bag) - A N95 filter holder with a threaded cap I've designed also a belt latch and a filter box container. I've provided source files for these too. For border sealing you can use some adhesive seal foam tape. To seal the filter connector, you can use a bit of super glue. You can use the Fusion 360 source file to change the mask thickness and the clearance of all the attachment parts. ##Updates *** *30 April 2020* - Recreated the Fusion 360 design with a better and cleaner construction for all components - Added all mask sizes - Added thin (0.8mm) and wide thickness (1.2mm) for all mask sizes - Reverse engineered all the missing parts: filter cap, N95 connector, N95 cap, N95 holder - Created a belt latch ***

Statistics

Category

Tags