22mm CONNECTOR with PRESSURE SENSOR ADAPTER
Description
22mm CONNECTOR with PRESSURE SENSOR ADAPTER Design to be mounted on the line connecting the ventilator and the patient. One is design for BMP280 - Module dimensions of 15.2 x 12 mm. https://arduino-shop.eu/arduino-platform/1488-iic-i2c-pressure-sensor-and-the-temperature-of-the-bmp280-33-v.html, and the other for BMP280 - 21 X 19 mm model. If your sensor differ, just let me know, and will design one to fit your needs! Require a 12.5 -13 mm rubber plug - design space for plug is 12mm - that plug must to enter forced on position; and the other one 20.5 -21mm. A filament 3d printer will print better the Y type, the resin can print both types. All parts can be 3d printed. All parts are design to be printed without support. All parts are in right position to be printed - except for the NUT; what looks like i forget to flip! :) Strongly recommend printing at 100% infill! And a flow of 108 - 110% is recommended. Recommend using a PUNCH HOLES cutter 13mm in order to cut the parts from a 10mm rubber sheet. Make central hole base on yours sensor cable diameter. This design was not tested and was not medical approved. Use it as a last resort! Be Safe! Stay Safe!
Statistics
Likes
1
Downloads
0