Adaptación V6 - CR10
Description
Adaptación del fusor V6 a la CR10. Este adaptador esta pensado para minimizar al máximo el peso del conjunto, y proporcionar un flujo preciso de aire en la barrera térmica del filamento. Los orificios de 4 mm que hay en la parte trasera, están diseñados para alojar insertos de 4 mm y poder sujetar con firmeza la brida del Barrel, y el ventilador del fusor. para el ventilador de capa, se utiliza el mismo que viene con la maquina, y se roscan directamente sobre la pieza impresa, los mismo tornillos de métrica 2 que vienen con la maquina . . Adaptation of the V6 melter to the CR10. This adapter is designed to minimize the weight of the assembly, and provide accurate air flow in the thermal barrier of the filament. The 4mm holes at the rear are designed to accommodate 4mm inserts and to hold the Barrel flange and the melter fan firmly. For the layer fan, the same one that comes with the machine is used, and the same 2 metric screws that come with the machine are screwed directly onto the printed part.
Statistics
Likes
1
Downloads
0