Ultra Silent Part Cooler for CR-10 E3D V6 mount
Description
**Please post your print as "make", if you use it I would like to see it :D** Part Cooler for 60mm fan to be mounted on Chito E3D V6 parts > https://www.thingiverse.com/thing:2494642 ###The cooling duct: - **Build plate support only required** - there is built-in support inside for the most critical part of the print. _(You will need to cut them of the print before installation.)_ - You will need the 2 brackets, 1 left and 1 right. _(You can download 1 of them and mirror it they are identical parts)._ ###The X axis pulley cover: - **No** support _(flip on the flat side of the part in your slicer)_ - is required because the original mounting end stop plate is too thick. _(The cooling duct will crash into it if you don't replace it)._ - has 2 cable hooks inside with built-in support to cut of the print. _(This is to attach the end stop cable nicely and get it out under the X stepper)._ - 2 screws mounting for stepper damper _(You may need to change orientation of the damper/stepper.)_ - 4 screws version will be uploaded later. Really silent cooling now, the 2 fan blowers such as those used with Chito cooling parts are too loud in my point of view. Now the printer is only doing noise when printing/moving really fast.
Statistics
Likes
5
Downloads
0