Anet A8 plus Z axis frame joint
Description
This mod is to solve a problem in the Z axis frame. It moves and it is not orthogonal (in my case my printer was 4 deg. off). I have taken idea from this design https://www.thingiverse.com/thing:3686755 from 3Define but I have decided to have less part... (unfortunately you have to thread the side of your printer v slot profile). For the mod You need 2 x M8 x 500 mm long threaded rod 8 x M8 bolt 4 x M8 washer 4 x M5x20 screws allen key and small washer (verify your printer if you have M5 or M6 screws in the center side of the v slot-profile) Print in PETG for stiffness PLA can do the job as well. Thread printer profile, assemble as photo, mount in the printer, trim and check orthogonality (you can use a cellphone app to do that) EDIT: 20_10_2020 Added front part, same instruction as the back part but with nlonger screws
Statistics
Likes
6
Downloads
0