T300 GTE Blackout Mod (Thrustmaster buttons/logo)
Description
##I've spent countless hours measuring and printing these to ensure that they fit properly, print (relatively) easily and look great. I have released them for free but **do feel free to make a donation if you like the end product :)** ## **What this is:** - Buttons and center logo replacement for the Thrustmaster T300 Ferrari GTE sim racing wheel. - Both are quick prints, ~10-15mins - May work for other wheels too, do try and report back if you do :) ## **What to print:** - **For the buttons:** Each button is made up of 1 pin ("Button Pin_T300GTE.stl") and 1 button ("Buttton_T300GTE.stl") The pin is inserted into the bottom of the button, with the hex head going into the bottom hole of the button - **For the center logo:** 2 versions are provided: 1. McLaren logo ("LogoMcLaren_T300GTE.stl") 2. Blank logo for customization ("LogoBlank_T300GTE.stl") ## **Installation:** For both the buttons and the logo, you will have to take apart the wheel itself. This is a simple process and the whole thing should take less than 10 minutes. - Buttons: Reuse the rubber part found under each of the original steering wheels - Logo: Pop out the original Ferrari logo by releasing the clips and snap in the new one. Be careful as the clips may be fragile [The front button plate can be found here.](https://cults3d.com/en/3d-model/game/thrustmaster-t300-gte-front-button-plate) I am indeed charging a fee for it, as this took weeks to perfect. Do share your makes!
Statistics
Likes
18
Downloads
0