Thingcam Mini
Description
<p align="center"> <img src="https://ptpimg.me/399pk8.png" alt="misterjtc logo" width="450"> </p> <h1 align="center">Raspberry Pi Home Security Camera</h1> <p align="center">This is a custom 3D printed raspberry pi camera solution</p> --- <p align="center">This project uses **open-source** software to deliver a cost-effective home security solution with motion detection.</p> <p align="center">The pieces of software used in this project are highly flexible and can likely be adapted to your configuration although it may deviate from what I have outlined below.</p> --- <h3>Thingcam Mini - Hardware</h3> This camera is designed to be a small security camera. Currently, it doesn't support night vision, but its something that I would like to add in the future. It uses a RaspberryPi Zero W and a Pi Camera Module https://www.buyapi.ca/product/raspberry-pi-zero-w/ https://www.buyapi.ca/product/raspberry-pi-zero-mini-camera-cable-38mm/ https://www.buyapi.ca/product/raspberry-pi-8mp-camera-board-v2/ It also uses a couple of neodymium magnets to hold the body to the mount. https://www.amazon.ca/gp/product/B07KP9PDCB/ and it needs a 90° micro-usb cable in order to fit in the housing. https://www.amazon.ca/gp/product/B001AR6MI6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 <h3>Thingcam Mini - Software</h3> An example of a software setup can be found here: https://github.com/misterjtc/raspberrypi_security
Statistics
Likes
9
Downloads
0