Stevens Super Trofeo Tribike case
Description
I designed a rear case for Stevens triathlonbike Super Trofeo. The design is created for frame size S! It can hold a CO2 pump/catridge (22mm with included adapter and 24mm catridges from SKS) as well as a spare tube and needed tools. Check your slicer scaling with the given testprint file before you waste a lot of filament! You'll need: - Stevens Super Trofeo (Frame Size S) ;) - 4 neodym magnets 10x2mm - glue for the magnets - paint to fit it to your bike For the Garmin Varia radar lid you also need the original bike mount or an adapter ( thing:4463334 ) incl. needed screws ATTENTION: Please secure the radar lid with a zip tie etc. Otherwise there is a chance of loosing the lid with the mounted radar (potholes etc)! I try to redesign the lid in the next few weeks. _____ Update 17.07.2020: - added 2 different lids with a integraded mount for Garmin's Varia Radar RTL If you dont want to use the original Garmin mount (e.g. because of a 2nd bike), you'll find a mount solution im my other things here on Thingiverse! Update 12.06.2020: - Case for frame size M in progress! Update 18.04.2020: - added a testprint file (5mm height) for scalingtest Update 11.09.2020: - Due to a lot of work, I wasn’t able to create and upload the new files, yet. I hope, that I will finish testing and creating them by the next 1-3 months. Till than, don‘t hesitate to send me requests or suggestions! The stl files will be available for everyone! —— Update 13.01.2021 - BETA: - I uploaded v3 of the case with an integrated backlight. the backlight should be printed with a translucent resin printer. But you can also try it with clear filament. The backlight can be powered with 2x 5mm LEDs and a Lipo battery. Set perimeters only - deactivate allow single extrusion walls. I had to print the files in 101%. Feel free to leave a comment and or a tip :)
Statistics
Likes
31
Downloads
0