Geeetech A10M Chimera Mount v2
Description
The original mount that I designed worked well, but I didn't like the cooling solution that I was using. I've modified the design to allow two 5015 blower fans to be used on each side. The improved cooling makes a huge difference. You'll need some M3 screws, and the holes for the screws are a bit tight and give the screws something to bite into. If you find the holes too tight, you can drill them open a bit. I can also modify the design to have bigger holes if anybody wants. I also created a BL Touch mount that will allow it to be mounted onto the 30mm fan on the front. I would recommend printing with resin, PETG or ABS as these parts will be in really warm areas and PLA will soften and deform when it gets really warm.
Statistics
Likes
2
Downloads
0