Adjustable Gopro Hero 5/6/7 mount for Hyperlite Glide
Description
I designed this mount for the hyperlite glide, but it will also work with any of the hyperlite frames with the same hole pattern. The idea for this design is to have an adjustable gopro mount thats still rock solid in any of the angles, without using permanent solutions like zip ties. The way this frame mounts is with the 4 screws for the base, and a screw going through the top half, the base, and the top plate into a hex nut on the bottom. ideally this could be a press nut to make installing easier. The supported angles are 10, 20 and 30 degrees, to account for all use scenarios. Switching between them is simply the case of taking out the gopro, and unscrewing one screw. I have yet to print this model so it more than likely does't work perfectly yet, so let me know if any problems so I can fix them. The bottom plate is also adaptable to any frame (with modifications to take the place of the center whole on the hyperlite glide) so let me know if there are any frames I should support. ps as I have yet to print this I have no idea what settings you should use.
Statistics
Likes
3
Downloads
0