Taz6 0.8 mm or 1.2 mm Fan Shroud Scoop
Description
This is a part scoop designed to replace the fan shroud on a Taz6 for the 0.8 mm HS or the1.2 mm HS+ nozzle assembly. The idea here is that the scoop can be used to push parts off the build plate to allow for continuous printing. This part is designed to be customizable such that the 3Dverkstan visor (for COVID19 PPE) can be pushed off (which cannot be readily accomplished with just the print head alone). I have validated that this design can do this when printed at the print settings below. Some early feedback received is that the part may be best printed without the pre-made holes. Myself, I used the part without pre-made holes by filling then in and then re-exporting the STL. I then used self tapping screws from Home Depot to secure everything together. Many thanks to Rose Almond of Rose Almond designs for Solidworks workup.
Statistics
Likes
0
Downloads
0