Air Assist Nozzle for K40 Laser Cutter
Description
This is an air assist nozzle fro a standard K40 laser cutter. - It is designed for a focal length of about 51mm from the bottom of the original laser head. - The nozzle extends 45mm below the bottom of the original nozzle. - It uses 8mm (OD) airline tubing and is simply push-fit into the tapered tube at the side of the nozzle. - Use an M3 nut (preferably nylock) and bolt to secure the nozzle of the laser head.
Statistics
Likes
7
Downloads
0