Wanhao Duplicator I3 Plus Feet, Adjustable, In-line with frame
Description
In-line frame adjustable feet for Balco Touch/Wanhao Duplicator I3 Plus - (Wanhao, Cocoon Create, Monoprice, Balco etc) I wanted some adjustable feet which could be fitted in-line with the printer’s chassis/frame and not the offset /cantilever design. Also, I wanted a mechanism to fix the feet in place which could accommodate the various chassis/frame thickness. The Ikea Gulliver risers: https://www.thingiverse.com/thing:3569117/files by m1n1m seemed to be a good concept for the design I wanted. The design is made up of 3 parts: - 1.Feet bottom/base part – Basically m1n1m raiser 40mm bottom/base re-scaled to 30% of the size. 2.Feet top/upper part - m1n1m’s screw raiser re-scaled and redesigned with the frame slot and a M4 threaded hole for the screw fixing (I used a hex grub screw, but any M4 bolt would suffice). 3.Feet pad – To prevent printer movement and reduce vibration I’ve added a TPU/Flexible filament pad to the bottom of the base.
Statistics
Likes
9
Downloads
0