Adjustable Adapter for 15mm diameter laser for Sliding Legolini mini bow
Description
This is an modified adapter for the Sliding Legolini Project you can find here: https://www.thingiverse.com/thing:4210059 If you own a 15 mm diameter laserpointer and you want to adjust the point in X and Y direction to mark the target exactly, you will need this! The highlight: the entire guide for the laser pointer is conical. This makes the rear part of the laserpointer movable. Two springs permanently press against the housing. The laserpointer can be moved individually with a counter screw located opposite each other. The complete adapter can be mounted on a 22mm rail. No support needed! For assembling you need 2x small springs (the same kind of springs, you need for the sliding legolini project), 2x M3 nuts, 2x M3 screws, 2x M4 nuts, 2x M4 grub screws (or normal screws, grubs are looking better imho...). For easier assembling i recommed to use 2x M4 screws (replace them with grub screws after finished assembly) Some photos do not show the current status. The STL file contains all the latest changes. *** Before using a laser pointer, please check whether this is permitted in your country! ***
Statistics
Likes
32
Downloads
0