SOURCE V - printable version

Description

# source_v Open Source FPV Drone Frame project initiated by Team BlackSheep [<img src="https://github.com/ps915/source_v/raw/master/photos/source_v_small.png" width="800">](https://github.com/ps915/source_v/raw/master/photos/source_v.png) # About SOURCE V ## The idea The SOURCE V is a continuation of the SOURCE frame line initiated by Team BlackSheep. It seeks to perfect the vertical, ultra-stiff and low drag racing frame for drone racers. The frame is donated to the community to empower creators and makers, and integrate best practices and current trends faster into a continuously manufactured product. In return, it allows the local distribution network to have cheap and direct access to a good frame to compete in an increasingly competitive marketplace. ## Frame specifications * Wheelbase 5": 218mm * Top Plate: 2mm * Bottom Plate: 2mm * Standoff height: M3x30mm * Arm thickness 5": 2x12mm * Stack Mounting: 30.5 × 30.5mm & 20 x 20 * Weight 5": 63g ## Hardware * 4x Standoffs M3x30mm * 24x M3x14mm ## This Thingiverse I converted all needed files to the .stl format, so that you can create your own 3D printed version of the frame (i´m using it for test fitting and further improvement before cutting it out of carbon) ##--Edit-- What you need to print * 2 x MOTOR-PLATE-BACK-LEFT.stl * 2 x MOTOR-PLATE-BACK-RIGHT.stl * 2 x MOTOR-PLATE-FRONT-LEFT.stl * 2 x MOTOR-PLATE-FRONT-RIGHT.stl * 1 x BOTTOM-PLATE.stl * 1 x TOPPLATE.stl * 1 x ST-PLATE-BACK.stl * 1 x ST-PLATE-FRONT.stl * 1 x ST-PLATE-LEFT.stl * 1 x ST-PLATE-RIGHT.stl * Source V-01-ARM-Back-L.stl * Source V-01-ARM-Back-R.stl * Source V-01-ARM-Front-L.stl * Source V-01-ARM-Front-R.stl ## Update * After a request, i´ve added the .dxf and .step files * After a comment, i checket the length of the arms, which are, as stated, not all the same. So i´ve added / changed the files

Statistics

Category

Tags