DJI FPV Goggles X-Air Faceplate integration
Description
UPDATED: Some people tell me there is some variation between X-Air Antenna. I have give about 0.5mm of room to the Brackets. Please tell me if everything is fine. Since I use oly one X-Air antenna with two omnis, I decide to integrate the antenna to the goggles. I like the Night vision goggles look and the goggle are now more compact. You will need standard M2 x 10mm screws to assemble it. For the moment I use a beige extention cable but if you buy those two items the left and right cables will be identical... If tou don't already own a X-Air I recommand you to buy a custom one with two cables instead of one. Contact Hugo at TrueRc 6 inches black extension cable: https://www.aliexpress.com/item/4000378755210.html?spm=a2g0s.9042311.0.0.3a9a4c4d614vYZ RP-SMA to SMA adapter (See picture): https://www.aliexpress.com/item/4000265952325.html?spm=a2g0s.9042311.0.0.3a9a4c4d614vYZ I recommand to print them in PLA face down slowly (50mm/s) with 0.12mm layer height. Let me know if you like or not.
Statistics
Likes
26
Downloads
0