ESP32-CAM mount
Description
ESP32-CAM mount system for used with Home assistant. ill update this with pics and needed materials parts list camera's i used https://www.amazon.com/gp/product/B07S5PVZKV/ref=ppx_yo_dt_b_asin_title_o00_s04?ie=UTF8&psc=1 power system parts buck boost power board https://www.amazon.com/gp/product/B07T7ZCTNK/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1 lipo micro usb charger https://www.amazon.com/gp/product/B06XQRQR3Q/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 switch https://www.amazon.com/gp/product/B0817QGXL2/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1 lipo is a regular 18650 2500mah wiring is spare i had laying around i set every thing up to use 4mm brass threaded inserts and 3mm screws. i used a raspberry pi heatsink on the ESP32-CAM. for the most part everything fits nicely and is hot glued into place. i did learn i received clone ESP32-CAM's and each fits differently in the holder so some fitment work may happen. the lipo is for battery back up and to help ease the work on the usb charger. so far it works great for home assistant (with esphome add-on you can mod cam settings OTA so only the first flash is hard wire) link to programming this https://www.youtube.com/watch?v=-towjof_ixU and the handy flasher https://github.com/esphome/esphome-flasher
Statistics
Likes
5
Downloads
0