Filament spool adapter for VESA LCD mount
Description
This is an adapter to use a standard VESA monitor mount for filament spools. It uses the standard 100mm x 100mm hole pattern. (4) M6 x 20mm or 1/4-20 x 3/4" screws, washers and nuts are required, but most VESA mounts come with an assortment of hardware that can be used. The setup in the picture is an Ender 5 plus direct drive and the center of the spool is approximately 400mm (16") above the hot end.
Statistics
Likes
11
Downloads
0