Din Rail Pi Holder
Description
#Pi holder for Din Rail. I have designed brackets for Din Rail for better fastening of my pis. ###For the Banana Pi: The file "Banana_pi_base_onepart.stl" and "Banana_pi_base_towpart_a.stl" + "Banana_pi_base_towpart_b.stl" contain the same object. The difference is that in version a more support structure must be printed and in the other version two parts must be glued together. #####BOM: 1x Alphacool Copper Heatsinks 14x14mm + Heat conducting adhesive 1x 90° Micro USB Angle 4x M3 Nuts 4x M3x10 Cylinder head screws (e.g. DIN912) 1x Banana_cover.stl 1x Banana_pi_base_onepart.stl or Banana_pi_base_towpart_[a-b].stl 1x Lock.stl ###For the Banana Pi + SSD: Glue part left, middle and right together. #####BOM: 1x Alphacool Copper Heatsinks 14x14mm + Heat conducting adhesive 1x 90° Micro USB Angle 4x M3 Nuts 4x M3x10 Cylinder head screws (e.g. DIN912) 1x Banana_pi_ssd_cover.stl 1x Banana_pi_ssd_left.stl Banana_pi_ssd_left.middle.stl Banana_pi_ssd_right.stl 1x Lock.stl ###For the Raspberry Pi 4 : Because the Pi 4 is warmer a better cooling is needed because I have a large heat sink screwed on so that no lid is needed. #####BOM: 1x Pi 4 Heat sink 1x 90° USB-C Angle 4x M2,5x10 Cylinder head screws (e.g. DIN912) 1x Pi_4_base.stl 1x Lock.stl
Statistics
Likes
6
Downloads
0