RVOLT *beta* 3in1 Frame Brace Kit - Eryone Thinker
Description
Made specifically for the Eryone Thinker+S+SE model printers. This is made to work with the stock hotend setup. I will be making another version to work with the extra bulk of custom hotends 1) Frame Brace 2) Lead Screw Mod 3) Mounting solution (for lights, cameras etc) What you will need. 550mm 2020 Extrusion Rail M5 screws + nuts (20mm) x 2 to connect top and bottom mount to end caps M5 screws (use the stock screws for top mounting) M3 screws + tnuts(14mm) x 8 to connect end caps to the rail + bottom mount + front of top mount (just buy an M3 + M5 assorted screw kit on amazon) The frame caps have 4 screw holes each that need t-nuts to lock them into place. If you want to go the extra mile, you can drill tap the ends of the 2020 rail with an M5 tap and drop an m5 screw down the top of the cap too! This 3 in 1 frame brace kit will reduce vibrations in tall prints, keeping them from translating into the detail of your tall prints. The top bracket replaces the lead screw guide hole and gives it a downward extension. This was intended to allow the usage of 500mm lead screws which are MUCH easier to locate as a replacement. The stock 510mm lead screw is very difficult to find without having to pay the extra of a custom cut if you're looking for a fast local solution. Being that it utilizes a 550mm 2020 extrusion rail, you'll not only have the benefits of a factory look but extra mounting space for everything from lighting to more playroom for mounting cameras. If you like the side spool mounted look, you will be able to position it in the same place without interference but also be able to have it sit higher or lower if you choose to use the frame brace as a mounting solution. The frame brace centers the 2020 rail between the 2040 rails providing an even symmetry to compliment the look of your stock printer. If you found this useful and would like to donate, please donate what you think it is worth to https://paypal.me/rvoltusa Thank you! Thanks, Enjoy!
Statistics
Likes
5
Downloads
0